ee

Short Lead Time for Silicone Glue Nz - Two-component board glue – DESAY

Short Lead Time for Silicone Glue Nz - Two-component board glue – DESAY

short description:


Product Detail

Related Video

Feedback (2)

Being supported by an highly developed and specialist IT team, we could give technical support on pre-sales & after-sales service for manual sealing glue, Silicone Sealant Glue, disposable latex gloves, If you have the requirement for virtually any of our items, make sure you call us now. We are wanting ahead to hearing from you before long.
Short Lead Time for Silicone Glue Nz - Two-component board glue – DESAY Detail:

5. Usage:

(1) Pretreatment: base material leveling, glue, according to the proportion of the main agent (milky white) and curing agent (dark brown) 10:1 ratio.Stir the glue evenly, and the mixed glue should be used up within 30 ~ 60 minutes.

(2) sizing: sizing should be completed in 1 minute, the cloth glue is uniform and the end cloth glue should be sufficient.

(3) composite: pressure time to be sufficient, the coated plate in 1 minute, 3 minutes must be pressurized, pressure time 45 ~ 120 minutes, special hardwood 2 ~ 4 hours.Pressure strength should be enough, cork 500 ~ 1000kg/m2, hardwood 800 ~ 15000kg/m2.

(4) Post-treatment: after pressure relief to keep healthy, health temperature above 20℃, 24 hours can be lightly processed (saw, planer), 72 hours after the deep processing, during the period to avoid sunlight and rain wet.

Product name: two-component plywood adhesive

Type of PVAC – PB

Capacity multiple specifications

The exterior color is milky white

Curing 50%

Brands have to match

Viscosity (MPa ·s) 5000-8000

PH 5-6

Curing time 2-4 hours

Shelf life is 12 months

Product parameters

 

product name Two-component board glue  Brand name desay
type PVAC-PB Viscosity(MPA.S) 5000-8000
Specifications 1L、5KG、10KG、25KG、50KG PH 5-6
Exterior color Main agent (Ivory)Hardener (light brown) Curing time 2-4h
Solid content Main agent(≥50%)Hardener(≥99%) Shelf life 12 months

 

 

Features

1、Strong adhesion

2、Excellent water resistance

3、Stable in nature

图片5

 

 

 

 

Scope of application

It is suitable for jigsaw bonding of non-structural materials and structural materials.

图片6
   

 

Instructions

1、Pretreatment: The moisture content of the wood should be controlled between 8-12%; the bonding base surface should be smooth and flat, without warpage, dust, oil, etc.

2、Sizing: the main agent: curing agent (10: 1) ratio mixing needs to fully stir for 3-5 minutes, until uniform. After the glue is prepared, it should be used up within 1-2 hours. Bubbles and volume expansion may occur during use, which is a normal phenomenon. You can continue to use after slight stirring.

3、Curing: The pressing time is generally 2-4 hours, depending on the temperature 

and humidity of the construction environment.

图片7

Precautions

1.Base material leveling is key:

Flatness standard: ± 0.1mm Water content standard: 8% -12%;

2. The proportion of glue is very important:

The main agent (white) and curing agent (dark brown) are mixed at a ratio of 100: 10 according to the corresponding ratio;

3. Stir the glue evenly:

Use a stirrer to repeatedly pick up the colloid 3-5 times, without the filamentous brown liquid. The mixed glue solution should be used up within 30-60 minutes;

4. The glue application speed is fast and accurate:

The glue application should be completed within 1 minute. The glue should be uniform and the glue on the end should be sufficient.

5.Pressure time should be sufficient

The coated boards are pressed together within 1 minute, and must be pressurized within 3 minutes. The pressing time is 45-120 minutes, and the hardwood is 2-4 hours;

6, the pressure should be sufficient:

Pressure: softwood 500-1000kg / ㎡ hardwood 800-15000kg / ㎡;

7, after decompression to maintain health:

The health temperature is above 20 ° C, it can be lightly processed (saw, planed) in 24 hours, and can be further processed in 72 hours. Avoid sunlight and rain during the period;


Product detail pictures:

Short Lead Time for Silicone Glue Nz - Two-component board glue – DESAY detail pictures

Short Lead Time for Silicone Glue Nz - Two-component board glue – DESAY detail pictures

Short Lead Time for Silicone Glue Nz - Two-component board glue – DESAY detail pictures

Short Lead Time for Silicone Glue Nz - Two-component board glue – DESAY detail pictures


Related Product Guide:

We can always satisfy our respected customers with our good quality, good price and good service due to we are more professional and more hard-working and do it in cost-effective way for Short Lead Time for Silicone Glue Nz - Two-component board glue – DESAY , The product will supply to all over the world, such as: Spain, Guyana, Estonia, We have established long-term, stable and good business relationships with many manufacturers and wholesalers around the world. Currently, we are looking forward to even greater cooperation with overseas customers based on mutual benefits. Please feel free to contact us for more details.
  • Wide range, good quality, reasonable prices and good service, advanced equipment, excellent talents and continuously strengthened technology forces,a nice business partner.
    5 Stars By Amber from Brunei - 2017.09.29 11:19
    The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
    5 Stars By Marina from Uruguay - 2017.08.28 16:02
    Write your message here and send it to us